Ge fanuc versamax fault
2 HAZARDOUS LOCATIONS IS SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS LOCATIONS ONLY Equipment labeled with II 3 G is suitable for use in Group 2 Category 3 environments. For product standards, general operating specifications, and installation requirements, refer to the VersaMax I/O Modules Manual, GFK Refer to the VersaMax I/O Modules Manual, GFK-1504, for product standards and general specifications.Ä£ 132mm (5.20 inches) PROFINET Scanner Modules 3 Installation in Hazardous Areas The following information is for products bearing the UL marking for Hazardous Locations or ATEX marking for explosive atmospheres: EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C & D, DIV. V2.2 GSDML file available for import into 3 rd -Party tools.
#Ge fanuc versamax fault mac#
External MAC addresses are only used for specialized Ethernet protocols such as MRP or LLDP Number of I/O Modules per station I/O data per station Yes Eight 2880 bytes total 1440 bytes of input data 1440 bytes of output data Configured using Proficy Machine Edition when used with a PACSystems RX3i PROFINET Controller (PNC) module, as part of an RX3i High-Speed IO LAN system.
Supports Classless Inter-Domain Routing (CIDR) Three. 32 input status bits and 32 output control bits Configurable: 1ms, 2ms, 4ms, 8ms, 16ms, 32ms, 64ms, 128ms, 256ms and 512ms One. USB 2.0 compliant running at Full-speed (12 MHz). Carrier is integrated into the module 0 to 60 C surrounding air temperature without a fan IC200PNS001: Two RJ-45 IC200PNS002: Two SC-Duplex One Micro-B connector.
#Ge fanuc versamax fault update#
Managing the state of the I/O when communications is lost Publishing fault information (alarms, diagnostics, etc.) to IO-Controller Ordering Information IC200PWR002 IC200PWR012 IC200PWR102 IC200ACC VDC Expanded 3.3 V Power Supply 24 VDC Expanded Isolated 3.3 V Power Supply 120/240 VAC Expanded 3.3 V Power Supply Empty Filler Module, optionalĢ 2 PROFINET Scanner Modules Specifications PROFINET Support RX3i PLC CPU Version Required Proficy Machine Edition Version Required Power Requirements Module Dimensions Carrier Required Operating Temperature Range Number of Port Connectors USB Connector (for firmware upgrades) PNS Status and Control Bits I/O Data Update on the PROFINET LAN Number of IP addresses Number of MAC Addresses I/O Station Maximum Limits RoHS Compliance Configuration PROFINET Version 2.2 Class A IO-Device Firmware version 7.0 or later Version 7.0 or later IC200PNS001: 3.0 W IC200PNS002: 5.0 W Height: 132mm (5.2 inches), Width: 134mm (5.28 inches) No. Managing PROFINET communication and module configuration between an IO-Controller and modules within the PNS node. Receive data from an IO-Controller on the PROFINET network at a customer-specified production period. Publishing data onto the PROFINET network to an IO-Controller at a customer-specified production period. It is not intended for permanent connection PNS001 PWR1 (L) PWR2 (R) OK FAULT CONNECT LAN MAINT COMM PORT 1 (L) PORT 2 (R)! The PNS module s main Remote IO functions include: Scanning all the modules within its stick (input and output scan). Note: The USB port is for firmware upgrades only. Can be upgraded in the field supports firmware updates via USB port. Supports Media Redundancy Protocol (MRP) client mode operation.
Each network interface module can be connected into a daisy-chain/line, star, or ring (redundant media) topology. Supports configuration using Classless InterDomain Routing (CIDR) with subnetting and supernetting. Standard PROFINET alarm and diagnostics reporting. Supports hot swap of a redundant power supply that is de-energized. Use of the second power supply is optional. IC200PNS001: Two 10/100 Mbps copper interfaces IC200PNS002: Two 100Mbps Multi-Mode fiber (MMF) ports Features Supports redundant power supplies. The PNS is available in two versions to allow you to use the network media that meet the requirements of your application. If network communications are lost, the PNS manages I/O states according to the individual module configurations. The PNS manages PROFINET communication and module configuration between an IO-Controller and modules within the remote node.
The PROFINET Scanner scans the modules in its node, retrieving input data and providing output data, and publishes input data on the PROFINET IO LAN at the configured production rate. 1 July 2011 VersaMax* IC200PNS001, IC200PNS002 PROFINET Scanner Modules The VersaMax PROFINET Scanner (PNS) module interfaces a remote node of VersaMax modules to a PROFINET IO-Controller.